Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Analyze the drive capability

Status
Not open for further replies.
W

windmillkity

Member level 3
Joined
Jul 28, 2005
Messages
55
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,645
Hi folks,

How to analyze the drive capability?, for example, a buf or inverter

Appreciate it,

Rgs

Wind
 

windmillkity said:
Hi folks,

How to analyze the drive capability?, for example, a buf or inverter

Appreciate it,

Rgs

Wind
Click to expand...



you should know the frequency. different frequency means different drive capability.

for example, a inverter can drive more load in lower frequency.

you can simulate the delay of inverter under different load to analyze the drive capability.

:D hope it's helpful
 

actually, I meant current driving capability. same approach?


you should know the frequency. different frequency means different drive capability.

for example, a inverter can drive more load in lower frequency.

you can simulate the delay of inverter under different load to analyze the drive capability.

:D hope it's helpful[/quote]
 

It is the driver close loop output impedance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top