Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Analogue Multiplexer Selection

Status
Not open for further replies.

Kvel

Junior Member level 1
Joined
Apr 20, 2011
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,403
Hi all,

I am using a Nuvotem Talem ASM-010 current sense transformer (**broken link removed**) together with a TI INA126PG4 instrumentation amplifier (**broken link removed**) connected to the ADC channel on my LPC2368 board (ETT CP JR ARM7). The ADC should finally be seeing a resultant analogue signal between 2.25 and 3.75V.

Due to board limitations I am looking to hook up 3 such current sensing/amplifier modules to the board via an analogue multiplexor, ideally one which only needs a +5v singled ended power supply.

Any opinions or suggestions on which multiplexors I should be looking at would be greatly appreciated.
 

[/COLOR]i successfully complete my project using CD 4067 analog multiplexer
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top