Jun 24, 2010 #1 Y ybskok Newbie level 5 Joined Feb 16, 2010 Messages 9 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,333 Hi, When I re-annotate my PCB using "Tools" -> "Re-Annotate" and afterwards update my Schematic using "Design" -> "Update Schematics in ..." the schematic designators are not updated. Now DXP claims that no differences are detected - how do I now match my schametic with the PCB? Best regards, Ybskok
Hi, When I re-annotate my PCB using "Tools" -> "Re-Annotate" and afterwards update my Schematic using "Design" -> "Update Schematics in ..." the schematic designators are not updated. Now DXP claims that no differences are detected - how do I now match my schametic with the PCB? Best regards, Ybskok
Jun 24, 2010 #2 loosemoose Full Member level 5 Joined Dec 9, 2008 Messages 319 Helped 128 Reputation 258 Reaction score 115 Trophy points 1,323 Location Vancouver, BC Activity points 2,662 under project option there is a tab called ECO Generation. on the bottom of the page there is an option called "Push Component Designators changes to Annotation file". you will need to disable that.
under project option there is a tab called ECO Generation. on the bottom of the page there is an option called "Push Component Designators changes to Annotation file". you will need to disable that.
Jul 21, 2010 #3 Y ybskok Newbie level 5 Joined Feb 16, 2010 Messages 9 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,333 You're a hero. Thank you.