zementmartin
Newbie level 2
Hello,
I have a problem with Altium Designer v6.9. I dicussed the problem with my teammates but nobody could help me with that. So I hope someone here could help me.
I created a clearance rule for my GND polygon with the following entries:
First Query: InPolygon
Second Query: All
Different Nets Only
Minimum Clearance 0.2mm
Priority of the rule: 1 (highest)
The problem is that the distance between a track and the polygon is 0.25mm and not 0.2mm but the distance between all other objects is correct, for example between a pad and the polygon it is 0.2mm. It doesnt matter what kind of value I choose for the clearance it is always 0.05mm higher between a track and the polygon. I tried 3mm then its 3.05mm, if I choose 0.3mm then it is 0.35mm (only between a track and the polygon, all other distances are correct).
I couldnt find an option or a rule that is responsable for the error.
Any idea what I can try to solve the problem?
Thank you for your help
kind regards
I have a problem with Altium Designer v6.9. I dicussed the problem with my teammates but nobody could help me with that. So I hope someone here could help me.
I created a clearance rule for my GND polygon with the following entries:
First Query: InPolygon
Second Query: All
Different Nets Only
Minimum Clearance 0.2mm
Priority of the rule: 1 (highest)
The problem is that the distance between a track and the polygon is 0.25mm and not 0.2mm but the distance between all other objects is correct, for example between a pad and the polygon it is 0.2mm. It doesnt matter what kind of value I choose for the clearance it is always 0.05mm higher between a track and the polygon. I tried 3mm then its 3.05mm, if I choose 0.3mm then it is 0.35mm (only between a track and the polygon, all other distances are correct).
I couldnt find an option or a rule that is responsable for the error.
Any idea what I can try to solve the problem?
Thank you for your help
kind regards