Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Adding full custom layout to GDS.

Status
Not open for further replies.
Joined
Feb 13, 2022
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
47
I want to add an ADC to the RTL to GDS flow of my SoC. I have the layout (GDS) of the ADC. How to do this?

I have access to Cadence ans synopsys toolchain. I have done the RTL to GDSII flow for the Processing system part.

But since ADC is non synthesizable(Full custom). I have no clue how to add that to the flow.
 

ADC becomes a macro element like a pad or a standard cell.
the question is who should merge both, in which tools?

If the final gds is generated by innovus, you need to have a RTL code which instantiate this ADC + the processing system.
The ADC instance must have a liberty, LEF files to be know by the synthesis and PnR tool (as well for all others physical tools, like LEC, STA, ...).
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top