ADC of the MAX10 on Quartus

[MAYLIS]

Hi can you help me please ? I configured the ADC of the MAX10 on Quartus, I powered it but I am stuck in the initialization of this last one, I wrote a code to initialize it but I still cannot have the data. It's in sample_store_csr_readdata where there are the samples, I put the address to 0x0000000 and the read to 1 and to initialize the ADC I put the address to 0x0, write to 1 and writedata to 1 because bit 0 corresponds to the initialization of the ADC.

 

[FlyingDutch]

Hi can you help me please ? I configured the ADC of the MAX10 on Quartus, I powered it but I am stuck in the initialization of this last one, I wrote a code to initialize it but I still cannot have the data. It's in sample_store_csr_readdata where there are the samples, I put the address to 0x0000000 and the read to 1 and to initialize the ADC I put the address to 0x0, write to 1 and writedata to 1 because bit 0 corresponds to the initialization of the ADC.

hello,

see that project (it uses ADC on MAx10 device):

https://maximator-fpga.org/examples/

Project name: Simple voltage meter based on internal ADC (IP cores + VHDL - complete Quartus Prime project)

There is complete project code to download.

Best regards