Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

adc input driving ability

Status
Not open for further replies.

shanmei

Advanced Member level 1
Joined
Jul 26, 2006
Messages
430
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Location
USA
Activity points
4,496
The input signal of adc is always connected to cmos gate/ sampling capacitor, does it mean it has low driving ability, the input of adc is a high impedance driver?

Dose ADC signal input can still drive resistor load?

Thanks.
 

An input isn't a driver, it's a load. It has to be driven, usually by a driver impedance which is much lower than the input impedance.

You could say an input has low driving needs.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top