Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADC channel monitoring for ATMEGA8

Status
Not open for further replies.
J

jagadeeshvulava

Junior Member level 1
Joined
Dec 10, 2010
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
hyderabad
Activity points
1,426
Hi all,
I'm trying to monitor the voltage range between 0 to 5V.... On ADC channels of ATmega8 controller..
please give reference ADC values for those voltages ....


thanQ
 

you can use a 5V reference. The resolution of the readings will depend on howmany bit adc you are using.
 

fine..
you can use a 5V reference along with a 8 bit adc which will give you a resolution of 19.5mV.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top