adaptor for pic18f8520

[pasicr]

pic18f8520 schematic

I use mcu board with pic18f8520 and pic18f8722 (80 pin's). My question is: I have a programmer (willem v4,5) for 40 dip pin's pic 18F seriies. I whont use this programmer for programming pic18f8520 and pic18f8722 included in software). I will draw schematic with adapter of pic18f8520 or pic18f8722 to 40 pin DIP package. I need information about pin connection from DIP40 pin pic18 to this my mcu board (see attachment).
or what signal need from dip40 pic18f to my boards,
sorry for my english
best regards

 

[gidimiz]

programming pic18f8520

Hi,

It is hard for me to understand what you want so im gussing that you want to program also the pic18f8520 and pic18f8722.
Find out in the data sheet where are the Vcc, GND, PGD, PGC and MCLR in the PIC and connect the same pines as in the 40 PIN that you have and thats it, you can program the parts.

If you found my answer useful, click on the button that says Helped me. ( NO points will be taken from you! And you will get 3 Points)


Good luck.

 

[pasicr]

what you need to program pic18f8520

I will try, thank you