Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

adaptor for pic18f8520

Status
Not open for further replies.

pasicr

Advanced Member level 1
Advanced Member level 1
Joined
Aug 13, 2005
Messages
440
Helped
39
Reputation
80
Reaction score
29
Trophy points
1,308
Location
Macedonia
Activity points
4,213
pic18f8520 schematic

I use mcu board with pic18f8520 and pic18f8722 (80 pin's). My question is: I have a programmer (willem v4,5) for 40 dip pin's pic 18F seriies. I whont use this programmer for programming pic18f8520 and pic18f8722 included in software). I will draw schematic with adapter of pic18f8520 or pic18f8722 to 40 pin DIP package. I need information about pin connection from DIP40 pin pic18 to this my mcu board (see attachment).
or what signal need from dip40 pic18f to my boards,
sorry for my english
best regards
 

programming pic18f8520

Hi,

It is hard for me to understand what you want so im gussing that you want to program also the pic18f8520 and pic18f8722.
Find out in the data sheet where are the Vcc, GND, PGD, PGC and MCLR in the PIC and connect the same pines as in the 40 PIN that you have and thats it, you can program the parts.

If you found my answer useful, click on the button that says Helped me. ( NO points will be taken from you! And you will get 3 Points)


Good luck.
 

    pasicr

    Points: 2
    Helpful Answer Positive Rating
what you need to program pic18f8520

I will try, thank you
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top