Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Adapter SCART-SVHS-RCA

Status
Not open for further replies.

meax98

Full Member level 3
Joined
Nov 25, 2001
Messages
180
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
1,787
scart svhs

I couldn't attach schematics in Gulson's message VGA to TV without TV-out:
**broken link removed**

so I'm posting it here.

I didn't want to draw it myself, so I have two parts, but...


regards
meax98
 

przejściówka svhs scart

Great job men!!!
 

adaptery 7 pinowe s vhs

http://tvtool.info/english/cablefaq_e.htm
stronka o kablach i tvtool
www.tvtool.de - strona domowa programu (english i german)

moim zdaniem nie ma sensu bawienie się w przejściówki z d-sub na skart
jeżeli ktoś ma tv out to tvtool wystarczy na stronce jest opis prześcia z
SVHS na composite (są dwie wersje 1 chipy bt/conexant 2 chrontel - mała różnica tylko jeden c )

Translate:
In my opinion better use TVtool software and buy graphic card with TV out mode (there are two versions chips bt/conexant and chrontel)
 

s vhs rca

Gader, the tools that you mention are expensive, for experimentation purpose is better the above circuit. Anyway, thanks for the information. In other post I have uploaded a circuit AD725 based for convert VGA signals in TV signals. Regards.
 

schemat eurozłącze s-video 7 pin

In Vga2TV design we use pin 15, 11, 7, 16, 20 and 9 of scart connector. How can I convert into svhs which is need pin 13, 15, 17, 19 of scart ?
 

rgb adapter schema

This is SCART and S-VHS connector schematic. So, from previous schematic you have to connect:

- on SCART side: composite video out, composite video ground, rgb red in, rgb red ground

with

- on S-VHS side: Y, C, Y ground, C ground

Just find these pins and that's it.

regards
meax98
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top