Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

AC and DC sweep with sine current sources in Proteus

Status
Not open for further replies.
B

babaali.amir

Newbie level 1
Joined
Jan 16, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
Hi there.
I want to get sweeps with proteus, and the circuit has a sine and a cosine current sources and is as below.
The first question is if I've inserted correct elements as sources with right parameters (according to the labels they have).
And my second question is how can I get the sweeps for the voltage probe I've inserted? I don't know what the reference and sweep variable are!
Thanks in advance.

pic.JPG
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top