AAnand928
Newbie level 4
I was simulating the window comparator LTC1042 for one of my application in which if my input voltage goes above 1.5V and below 0.5V its the fault condition. and if the input voltage is between the above voltage levels its the working condition
But there are certain doubts that i have.
1. for input values less that 0.5V the output isn't responding. for voltage higher 1.5V i am getting high value at the output.
2. Does this IC behave perfectly for DC application? Because while simulating i faced an error telling about requirement of time domain simulation.
3. If not, which IC is best suited for my application?
Please help me to know where i am going wrong..
Please find below snapshot for more understanding
Thanks in advance for your help.
But there are certain doubts that i have.
1. for input values less that 0.5V the output isn't responding. for voltage higher 1.5V i am getting high value at the output.
2. Does this IC behave perfectly for DC application? Because while simulating i faced an error telling about requirement of time domain simulation.
3. If not, which IC is best suited for my application?
Please help me to know where i am going wrong..
Please find below snapshot for more understanding
Thanks in advance for your help.