Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

About the operation of the apr9600 voice module

Status
Not open for further replies.

SINDHURI

Member level 2
Joined
Dec 13, 2012
Messages
46
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,662
Sir, In my Project I am using APR9600 voice module to get the feedback of the operated device. In APR9600 Module there are 8 message pins present. Is it possible to allot one message pin as the voice input to the entire system to operate.
As I know that APR9600 module is used only for voice record and replay.

My Project is "Voice Based Home Automation System" to give the voice commands as the input the system have used a PC section having speech recognition application. To give the input to the PC I have used head phone.

without having all these is it possible to operate it through APR9600 Voice Module.

Thanks in Advance.
 

tusemo

Advanced Member level 4
Joined
May 28, 2012
Messages
109
Helped
23
Reputation
48
Reaction score
22
Trophy points
1,298
Location
Turkey
Activity points
1,841
Without PC it is almost impossible, you have to use DSP card and program and design it.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top