About PLL Simulation Tools

[cakalhunter]

pll simulation

Hello

Can anybody recommend PLL simulation tool rather than ADSIMPLL in analog devices website? I am not even sure whether such a simulation tool exists except that.

Thanks and Best regards

 

[lambuman]

pll sim software

National Semiconductor has an online tool similar to Analog Devices. See if that works for you.

 

[madengr]

pll simulation software

ADISimPLL was derived from SimPLL. It works very well:
**broken link removed**

There is also this but I have not used it in 7 or so years:
http://eesof.tm.agilent.com/products/genesys/pll.html

Of course you can also use VSS but it will not do synthesis, but is excellent for simulation:
**broken link removed**

 

[biff44]

pll simulator

Speaking of Analog Devices, be really careful with their evaluation board software " Integer-N Software (ADF411X, ADF421X)". If you load it onto any computer with older than Windows XP on it, it will corrupt your windows files and destroy the computer!
A real bush-league operation!

 

[cakalhunter]

pll simulation tool

As far as I know, my friend, Radiolab SIMPLL does only allow AD components to put and simulate. For instance, If I want to simulate a pll circuit containing a phase detector apart from the one in AD IC's, can i do the simulation?

Thanks

ADISimPLL was derived from SimPLL. It works very well:
**broken link removed**

There is also this but I have not used it in 7 or so years:
http://eesof.tm.agilent.com/products/genesys/pll.html

Of course you can also use VSS but it will not do synthesis, but is excellent for simulation:
**broken link removed**

Added after 49 seconds:

 

[madengr]

online pll simulation

No, ADISimPLL is specifically for AD parts, that's why it's free. The commercial SimPLL is generic for any PLL. For instance I have used it for a design containing a Skyworks part.

 

[bnissim]

genesys pll

A good simulator for both linear and non-linear models is free and provided by Michael Perrott's group.

https://www-mtl.mit.edu/researchgroups/perrottgroup/tools.html

PLL design assistant is very straight forward.
Spend a few minutes on the tutorial for CppSim. I prefer this tool over matlab. It will save you time in the long run.

 

[cakalhunter]

pll tools

Thank you my friend. I am sure it will be very useful.

A good simulator for both linear and non-linear models is free and provided by Michael Perrott's group.

https://www-mtl.mit.edu/researchgroups/perrottgroup/tools.html

PLL design assistant is very straight forward.
Spend a few minutes on the tutorial for CppSim. I prefer this tool over matlab. It will save you time in the long run.