Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

About Pipeline ADC and Sigma-delta ADC

Status
Not open for further replies.

holddreams

Full Member level 6
Joined
Aug 2, 2005
Messages
351
Helped
15
Reputation
30
Reaction score
7
Trophy points
1,298
Location
Shanghai
Activity points
4,237
Hi,all,
I want to study and design an ADC,
which should I choose?Pipeline ADC or Sigma-delta ADC?
Anyone can give me some opinions and suggestions?
Thanks!
 

flash is first.
then pipeline.
last is delta sigma
 

I agreed, flash is fast but low in resolution...

Pipeline is moderate

Delta sigma is high resolution ADC
 

flash is the simplest and fastest .but has lest resolution.Pipeline has both high resolution(8-12bit)and high speed (100-200MHz).
sigma_delta has higher resolution (>14bit)
regards
so flash-pipeline-sigma is a good choise
 

Can I directly go to design sigma-delta?
For a beginner,how long will it take me to design such a circuit?One year?or more?
What's the trendcy of ADC?Sigma-delta?
 

If you focus on innovation at circuits level then pipeline
system level then delta sigma
 

Sigma-delta or pipeline ADC is subject to the application.
 

If you want do some sigam-dalta design, I think you must have some system background.
 

Recently,many researcher focus on bandpass sigma delta which can used in digital IF receiver.
 

as for study, i think, you should know more ADC circuits.different use ,different adc ckt.only this ,you can know deeply.
 

it depends on your application, those good for others maybe not match you very well
 

Pipeline adc maybe more popular and easier. You can design it firstly.
 

sigma delta is high resolution, and pipeline adc is high speed.
 

Pipeline ADC: High Speed Application
Sigma-delta ADC:High Resolution Application
 

PIpeline ADC is for high speed, sigma delta for lower speeds but lesser noise and better SNR.

Anyhow flash ADC is a part of all of the above so consider that to start with.
 

you need to come up spec first and then study the technology you will use , then it becomes easy to pick up the topology.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top