Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

about phase noise simulation

Status
Not open for further replies.
C

clear

Newbie level 6
Joined
May 17, 2001
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
27
I can simualte phase noise simulation on VCO by ADS or SpectreRF.

But, I can't do by HSPICE.

Therefore, Please guide me how to phase noise simulation by HSPICE.

Capability, Accuracy, etc...
 

hmmm...
I happened to know, that currently, HSPICE doesn't support any phase noise simulation.
Disappointed ?
But, I also happended to know, that labled as 2004.3 and planned to be release on someday of 2004, a RF version HSPICE will be out.
This version would be good at dealing with phase noise, mixer, S-parameter, stability, G_u, ...
Now it is in beta testing procedure and is calling for testing customer. Maybe you could contact with them.
 

you can you use ads simulate it with DF.
 

Nickwang,

The phase noise can be infered from HSpice by running the FFT command. Then the phase noise can be calculated by taking the difference between the peak of your signal to its sideband.

T Zul
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top