Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

about low current LDO MPC1710 only 20na

Status
Not open for further replies.

andy2000akimo

Member level 1
Joined
Sep 17, 2009
Messages
36
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,491
in standard cmos process . how to working in na current ?

I ever try use mos current mirror when bias cureent less < 0.1ua
some die have fail

yield loss ..
even simulation by hspice is ok , but real silicion have fail die

how to design total 20na LDO ??
bandgap need current , OPA also need operation current
 

erikl

Super Moderator
Staff member
Joined
Sep 9, 2008
Messages
8,114
Helped
2,694
Reputation
5,368
Reaction score
2,294
Trophy points
1,393
Location
Germany
Activity points
44,061
Perhaps it's not exactly standard CMOS? Could you show the data sheet?
 

andy2000akimo

Member level 1
Joined
Sep 17, 2009
Messages
36
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,491
MCP1710 , not MPC

MCP1710 Data Sheet - Microchip
ww1.microchip.com/downloads/en/.../25158A.pdf‎翻譯這個網頁
provides high-current and low-output voltages, while maintaining an ultra-low 20 nA of quiescent current during device operation. In addition, the MCP1710 can.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top