Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

a question about ansoft maxwell 3D v11.1 design

Status
Not open for further replies.

finger_eleven

Newbie level 2
Joined
Oct 11, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Home
Activity points
1,294
hi all,

i need some help about modeling a coil on maxwell 3D(transient analysys.).my problem is defining coil terminals.i have 6 coils(star connected) and 3 current source(star connected).i attached my work.coils are solenoid style winded.(ring style winding) and each coil has 130 turn.i design my model,i upload external circuit netlist to maxwell then i got this error when i validate my design..(by the way i try to do my analysys on transient solution type.)

"[error] Verify conduction path 'Path2': For any conduction path that has coil terminal excitation(s) specified, either exactly one internal coil terminal or two external coil terminals should be specified."

i have google it but i got nothing...
any turtorial/manual or lecture notes??or any idea how to define coil terminals?

sorry for my bad english.


10_1255223485.jpg


 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top