Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
You could use programmable logic as single chip solution. CPLD (Or older GAL, PAL...)
You could use a microcontroller as single chip solution.
You could use two HC390.
You coud use ICM7217 as 4 digit decimal counter with multiplexed BCD outputs (+ 7 segment LED display controller)
One other off beat solution might be an MC145151-2.
This contains a crystal oscillator and a 14 stage divide by N counter.
The counter division can be set to any number between 3 and 16,384 with fourteen programming pins.
It can certainly divide by 10,000 (or just as easily 10,001 or 9,999)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.