robismyname
Full Member level 6
- Joined
- Jan 17, 2008
- Messages
- 390
- Helped
- 11
- Reputation
- 22
- Reaction score
- 9
- Trophy points
- 1,298
- Location
- Central Florida
- Activity points
- 4,603
I have a microstrip line (rf trace with Zo=50 ohm). Somewhere on the trace I need to create .67nH inductor.
What formula do i use to do this?
or/and
What free sw is available that I can use to do this?
I found a calculator that finds the inductance if you provide the:
w =width of the strip in inches,
b = the length in inches,
h = the distance between the strip and the ground plane
here at
https://www.daycounter.com/Calculators/Microstrip-Inductor-Calculator.phtml
but can i use this considereing I see nothing about Zo=50 ohms?
please respond ASAP, please.......
What formula do i use to do this?
or/and
What free sw is available that I can use to do this?
I found a calculator that finds the inductance if you provide the:
w =width of the strip in inches,
b = the length in inches,
h = the distance between the strip and the ground plane
here at
https://www.daycounter.com/Calculators/Microstrip-Inductor-Calculator.phtml
but can i use this considereing I see nothing about Zo=50 ohms?
please respond ASAP, please.......