Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

3D antenna design in ADS

Status
Not open for further replies.
K

kazim

Member level 4
Joined
May 26, 2006
Messages
77
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,288
Location
Nowshera, Pakistan
Activity points
1,838
dear friends

i have ADS 2009 update 1 installed on my system. i want to make a 3D antenna. this version contains EMDS for 3D simulation but what si parameters really define a 3D antenna. i mean so i just have to increase the thickness of the copper to make it 3D.
i dont have any idea of making a 3D antenna. i dont want to use HFSS so help me out in ADS gys
 

U need to define the air box which is generally very small by default in ADS,
u need to define the airbox as open on all dimensions in ADS..
Dont make use of inbuilt gnd option which by default is considered to be as infinite gnd plane...
Its difficult to draw 3d objects in ADS alone u need to make use of EMDS 3d drawing ...or some other 3d drawing and port it into ADS...Thats the difficult part.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top