Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

2P2Z controller help

Status
Not open for further replies.
V

vinayakdabholkar

Advanced Member level 4
Full Member level 1
Joined
Nov 29, 2009
Messages
114
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
goa
Visit site
Activity points
2,195
I followed a application note from ti to design a 2p2z controller. Mapped the s domain controller to z domain, but found that the bode plots of the z domain and s domain controller are not similar. so i checked the bode plots of the controllers on the application note and they are also not similar. What am i missing here ? Shouldn't the plots be same ?
The bode plots attached are for the case1 in the application note (complex s plane zeros)
 

Attachments

  • slua416.pdf
    407.6 KB · Views: 79
  • 1.png
    1.png
    9.2 KB · Views: 69
  • 2.png
    2.png
    9.7 KB · Views: 91

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top