Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

2kW Full Bridge SMPS at 20kHz

Status
Not open for further replies.

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,611
Helped
54
Reputation
108
Reaction score
115
Trophy points
63
Activity points
13,685
Hi,
We were doing a 2kW PSFB off 400V PFC.
But realised the chip shortage may hit PSFB controllers.

I count approx 2 or 3 PSFB controllers on the market, from ti.com and analog (ex Linear)

So will also do plain FB, with simple ubiquitous controller.
Would you say 2kW is the practical limit of a FB at 20kHz?
Vout is +/-160V
 

One can take a push pull output of a standard controller - put it thru some gates and get full 4 channel phase shift outputs - plenty of examples on the net

lower freq's are a good idea for +/- 160V out -
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top