Zareen05
Newbie level 1
- Joined
- Jan 1, 2015
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 8
Hii All,
I'm doing a project on 2D DWT using pipeline architecture in VLSI. For this I took an image of size 256x256 and need to perform image compression as an application of 2D DWT.
Can anyone explain me the initialization of BRAM to hold the image values and then reading this values by the 2D FIR filter for the filtering operation to obtain the LL,LH,HL and HH subbands.The filter length is 4.All this is to be done in verilog.
I already got the .coe file for the BRAM and need later steps.
Thanks in advance!
Best regards,
Zeba
I'm doing a project on 2D DWT using pipeline architecture in VLSI. For this I took an image of size 256x256 and need to perform image compression as an application of 2D DWT.
Can anyone explain me the initialization of BRAM to hold the image values and then reading this values by the 2D FIR filter for the filtering operation to obtain the LL,LH,HL and HH subbands.The filter length is 4.All this is to be done in verilog.
I already got the .coe file for the BRAM and need later steps.
Thanks in advance!
Best regards,
Zeba