aryajur
Advanced Member level 3
- Joined
- Oct 23, 2004
- Messages
- 793
- Helped
- 124
- Reputation
- 248
- Reaction score
- 37
- Trophy points
- 1,308
- Location
- San Jose, USA
- Activity points
- 7,788
rbmod spectre model
Hello,
I have been trying to make this Bandgap circuit in Cadence and simulate it using Spectre. I managed to get some BJT parameters from somewhere, which I am using. The parameter block for the BJT is:
But I think these parameters do not represent the BJT for the 0.18um process. I need the parameters for the BJT urgently. I searched MOSIS' website also but it only had parameters to PMOS and NMOS transistors. How or where do I get the parameters for the BJT from??
Any help would be greatly appreciated.
Hello,
I have been trying to make this Bandgap circuit in Cadence and simulate it using Spectre. I managed to get some BJT parameters from somewhere, which I am using. The parameter block for the BJT is:
model wp2 bjt type=pnp is=1.229e-17 eg=1.169 xti=2.200 nf=1.010
+ ise=5.631f ne=1.740 ikf=5.363m vaf=16 bf=31 xtb=1.280 nr=1
+ isc=4.426e-16 nc=1.500 ikr=2.379m var=3.100 br=15 rc=276.231
+ trc1=2.31m trc2=13.691u re=2.647 tre1=250u tre2=0 rb=107.091
+ trb1=1.189m trb2=6.681u rbm=85.673 irb=3.413m cje=33.637f
+ mje=500m vje=990.003m fc=950m cjc=56.905f mjc=310m vjc=800m
+ xcjc=350m cjs=126.721f mjs=400m vjs=790m tf=16p tr=36n xtf=1
+ vtf=1.200 itf=2.454m ptf=25 kf=6.600e-16 af=1
But I think these parameters do not represent the BJT for the 0.18um process. I need the parameters for the BJT urgently. I searched MOSIS' website also but it only had parameters to PMOS and NMOS transistors. How or where do I get the parameters for the BJT from??
Any help would be greatly appreciated.