Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

2 layers microstrip-stripline SDS momentum simulation

Status
Not open for further replies.

Kooky613

Member level 2
Joined
Apr 27, 2018
Messages
44
Helped
0
Reputation
0
Reaction score
1
Trophy points
8
Activity points
414
I want to simulate with ads momentum a microstrip configuration top metal layer which will be connected somewhere else @ the rf pcb (40GHz) and is necessary to be interconnected to another layer throu an intermediate stripline layer...so if you have any suggestion or an example of something like this @ ads how to setup the simulation and the substrate definitions give me an advice!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top