Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help required for 4 x 4 bit unsigned multiplier

Status
Not open for further replies.
moonnightingale

moonnightingale

Full Member level 6
Joined
Sep 17, 2009
Messages
362
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Activity points
3,832
Hi In my book there is diagram of Cascaded 4x3 multiplier
what does he mean by this.
I want to design simple 4 x 4 bit multiplier. But i am confused with the pic of cascaded 4 x 4 multiplier. kindly tell me is there some change required in diagram for my requirement.
Whay he has connected those lines indicated by me.
 

Attachments

  • cascade_mult.jpg
    cascade_mult.jpg
    99.8 KB · Views: 199

They are carries. For example, the one you pointed with "why these are used to connect" in red is a carry from P1 to P2.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top