Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bitmap to Jpeg using AVR MCU ....

Status
Not open for further replies.
hm_fa_da

hm_fa_da

Full Member level 5
Joined
Sep 16, 2003
Messages
287
Helped
10
Reputation
20
Reaction score
4
Trophy points
1,298
Activity points
3,217
avr jpeg

hi all ,


i am going to use RS232 cam , i heard there is a cam with RS232 output , 5 frames per second ,
if i use bitmap , with 16 bits pixel depth , then 320*240*16 = 1,228,800 bps for each frame !!! , too much for
my data link so i want to connect it to an AVR MCU , then compress it and send through a data link , now i want to know which compression method is the best for this application and AVR also can decode and encode it .... ?,

is JPEG good for this application ?

i think 320*240 pixel is good for start .

Thanks and Best Regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top