Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

spice to ibis conversion

Status
Not open for further replies.
A

abhi002

Full Member level 5
Joined
Jun 8, 2005
Messages
281
Helped
25
Reputation
50
Reaction score
6
Trophy points
1,298
Location
searching
Activity points
2,721
spice to ibis converter

Hi
Has any one tried s2ibis3_v1_1 utility. When I run the command
s2ibis3.bat -s2ibis3 buffer.s2i
it is giving the following error
Running Java
Exception in thread "main" java.lang.NoClassDefFoundError: buffer/s2i
S2IBIS3,2003. North Carolina State University.

Actually I was looking for spice to ibis conversion.
Please tell me what the settings has to be done and what are the commands .

Help is really appreciated!

Regards,
abhi
 

convert spice to ibis

Using Cadence's Allegro Model Integrity you can make IBIS models from Spice models.
Model Integrity supports an HSPICE-to-IBIS conversion module that assists in creating IBIS models from HSPICE simulation runs. Use the output of the HSPICE simulation run, IBIS, and buffer options file to quickly create an IBIS model to identify V-I and V-T tables for typical, maximum/minimum corner cases from the HSPICE run file.
 

s2ibis3

thanks anssar,

I do not have Cadence,so i can not use it.
Actually there is a free utility available on web
**broken link removed**

i want to use that one.

I appreciate ur response.

Regards,
Abhi
 

hspice to ibis conversion

Hello,
Responses to this question as well as other similar questions/setup issues can be found in the S2IBIS3 FAQ site available at **broken link removed**
If you have further questions, you can email the authors at NCSU directly through the S2IBIS3 homepage.
Regards,
Ambrish.
 

www.ece.ncsu.edu/erl/ibis/faq/s2ibis3_faq.htm

Did you find the answer for that issue?
I'm geting the same error message, i entered in the University of North Carolina web site but i still don't have the answer.
Can you explain me how to install the s2ibis3?
Thank you
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top