Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

want to know how to convert verilog netlist to spice netlist

Status
Not open for further replies.
L

likun0427

Newbie level 2
Joined
Feb 8, 2006
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
spice netlist is required when using powermill(synopsys) to analyze power of the chip.
in Calibre, one command v2lvs is one way.
in panda, one command ver2cdl is another way to convert.

but, top module of the verilog netlist includes some IP which has no spice.

thanks for your suggestion!
 

for those IP which has no spice, use Herculus to extract the spice netlist from GDSII first
 

    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top