Nhera
Member level 1
I am able to import the HFSS model into circuit view, create a matching network, see how much return loss and coupling I have through the circuit analysis results.
However, I am not able to see how the matching network changes the realized gain. I could do a "link output" for the gain, and multiply it by (1-S11^2) in the circuit results, but that will not be accurate since some elements have significant coupling and the matching of other ports will effect every individual pattern. Is there a built in way of doing this?
If that is not possible, how do I access the complex vector radiation pattern for each element separately. I could come up with a page long equation to combine the results and paste it into the "output variables" window in the Dynamic Link results section.
Can anyone help me on this?
However, I am not able to see how the matching network changes the realized gain. I could do a "link output" for the gain, and multiply it by (1-S11^2) in the circuit results, but that will not be accurate since some elements have significant coupling and the matching of other ports will effect every individual pattern. Is there a built in way of doing this?
If that is not possible, how do I access the complex vector radiation pattern for each element separately. I could come up with a page long equation to combine the results and paste it into the "output variables" window in the Dynamic Link results section.
Can anyone help me on this?