rompelstilchen
Full Member level 2
I cannot power that pelletier module : TEC2-25408
Hello,
I have tried to power that pelletier module with an AT power supply but I reached max -10°C or something
so I ordered a 12V 10A power supply,
as I measure the pelletier module, it really does not go up to specs
barely -20°C (should <-30°C) and current is only half of the specified current
pelletier:
https://www.aliexpress.com/item/32386272344.html?spm=a2g0s.12269583.0.0.662f6f04RWvMLA
power supply:
https://www.aliexpress.com/item/32990203636.html?spm=a2g0s.9042311.0.0.3da24c4d7hBp9i
fan: I am using a 12V fan with a 10x10x4cm CPU fan
what am I missing ?
sheers
Hello,
I have tried to power that pelletier module with an AT power supply but I reached max -10°C or something
so I ordered a 12V 10A power supply,
as I measure the pelletier module, it really does not go up to specs
barely -20°C (should <-30°C) and current is only half of the specified current
pelletier:
https://www.aliexpress.com/item/32386272344.html?spm=a2g0s.12269583.0.0.662f6f04RWvMLA
power supply:
https://www.aliexpress.com/item/32990203636.html?spm=a2g0s.9042311.0.0.3da24c4d7hBp9i
fan: I am using a 12V fan with a 10x10x4cm CPU fan
what am I missing ?
sheers