+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Newbie level 4
    Points: 49, Level: 1

    Join Date
    Jun 2019
    Posts
    6
    Helped
    0 / 0
    Points
    49
    Level
    1

    Technika lcd22-208 tv

    Please forgive this novice question but...I was just given a free Technika LCD22-208 TV without remote.

    Question:
    The manual says - Using the top panel buttons to choose Mode/Source and switch between the different connections it says:
    1) Press [SOURCE] - The following will appear
    2) Press [\/] or [/\] to select the input you require.
    3) Press [OK]

    The problem is there's no OK to press on the top panel.

    Can I only do it with a remote?

    Thanks for any help

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 52,306, Level: 55

    Join Date
    Apr 2011
    Location
    Minneapolis, Minnesota, USA
    Posts
    12,826
    Helped
    2553 / 2553
    Points
    52,306
    Level
    55

    Re: Technika lcd22-208 tv

    Perhaps after a few seconds the setting is applied even if you don't press OK?

    There are store-bought 'universal' remote controls, for use with a large variety of appliances. The instructions give a list of codes which program the remote to send the correct led flash sequence.

    Often the list gives several codes for a brand name. You may need to try more than one code before hitting the right one.



    •   AltAdvertisement

        
       

  3. #3
    Newbie level 4
    Points: 49, Level: 1

    Join Date
    Jun 2019
    Posts
    6
    Helped
    0 / 0
    Points
    49
    Level
    1

    Re: Technika lcd22-208 tv

    Thanks for the help.

    After a few seconds the Source dialog box disappears and when I check it again the selection is back to where it was originally.

    I've located a remote for this model on eBay, so will get it and hopefully that will do the trick.



--[[ ]]--