Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Convert 24 bit BMP image to halftone BMP image

Status
Not open for further replies.

Saad Rafey

Newbie level 1
Joined
Jan 21, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,292
I am converting a 24 bit bmp image into a halftone bmp image using C and Verilog HDL.

First of all I have written a C program to read pixel values of 24 bit bmp image and write them into a text file(1).

The C program is given below:-
Code:
     #include"stdio.h"
     #include"stdafx.h"
     void con(unsigned char x)
     {
	char a;
	int j;
	FILE *f1;
	f1=fopen("image_24_bit.txt","a");

	for(j=0;j<=7;j++)
	{
		a=(x<<j & 1<<7)?1:0;
		printf("%d",a);
		fprintf(f1,"%d",a);
	}
	
	fclose(f1);
	printf("\n");
        }

        void main()
        {
	FILE *f;
	long int i=0;
        unsigned char c;
	f=fopen("sample.bmp","rb");
	for(i=1;i<=54;i++)
	{
	fread(&c,sizeof(c),1,f);
	}
	for(i=55;i<=177560;i++)
	{
        fread(&c,sizeof(c),1,f);
	con(c);
	}
	fclose(f);
        }
Then I have written a C program to make header of halftone mbp image.


Then I have written Verilog code to convert 24 bit pixel value into a halftone(1 bit) pixel value.

The Verilog code is given below:-
Code:
       module read(dataout,htpv);
       output reg [0:1420479]dataout;
       output reg [1:59186]htpv;
       reg [24:1]error[59186:0];
       reg [25:0]cpv,cpv_round,e_av;
       reg [0:1420479]data[0:0]; 
       reg [1:24]data_out;
       parameter threshold =8388608,w1=2,w2=8,w3=4,w4=2;
       integer i=0,f1;
       initial 
        begin
          $readmemb("image_24_bit.txt",data); 
          dataout=data[0];
        end
       initial
        begin
         error[0]=24'b0;
         f1=$fopen("HTPimage.bmp","a");
         for(i=0;i<306;i=i+1)
        begin
         data_out=dataout[(i*24)+:24];
         e_av=(w1*error[i])>>4;
         cpv= data_out + e_av;
         cpv_round=(cpv<threshold)?0:16777215;
         htpv[i+1]=(cpv_round==0)?0:1;
         error[i+1]=cpv-cpv_round;
       if(htpv[i]==1)
         begin
          $fwrite(f1,"1");
         end
      else
        begin
          $fwrite(f1,"0");
        end
       #1;
       end
      for(i=306;i<591886;i=i+1)
       begin
         data_out=dataout[(i*24)+:24];
         e_av=(2*error[i]+8*error[i-306]+4*error[i-305]+2*error[i-304])>>4;
         cpv= data_out + e_av;
        cpv_round=(cpv<threshold)?0:16777215;
        htpv[i+1]=(cpv_round==0)?0:1;
        error[i+1]=cpv-cpv_round;
       if(htpv[i]==1)
         begin
        $fwrite(f1,"1");
        end
       else
       begin
        $fwrite(f1,"0");
       end
       #1;
       end
       $fclose(f1);
      end
       endmodule
The 24 bit bmp image is given below link:-

https://i.stack.imgur.com/S7302.png





And the output image I got is below link:-

https://i.stack.imgur.com/NddIn.png



The haeder of the output image:-
42 4D 6A E7 00 00 00 00 00 00 00 36 00 00 00 28 00 00 00 32 01 00 00 C1 00 00 00 01 00 00 00 00 00 33 E7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF


The halftone(output) pixels values are:-00000000000000000001111111111111111111111111111100000001111111111111. . . . . . . . . . . . . 111111111111111111111111111111111111111111111111111111111111111111111111111



The output halftone image should consist of black and white pixels only. I am unable to sort out why I am getting this output.
 
Last edited by a moderator:

Hi there
To convert image in c# using code is a little bit difficult for me.I usually convert the image using a third party program for image.They are helpful and convinient.You can just
add an image converterto help you with the converting of 24 bit bmp image into a halftone bmp image using C .It's easier.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top