davorin
Advanced Member level 3
- Joined
- Jun 7, 2003
- Messages
- 901
- Helped
- 11
- Reputation
- 22
- Reaction score
- 4
- Trophy points
- 1,298
- Location
- Switzerland
- Activity points
- 7,349
Asking some oppinions here what is the most convenient way to implement FPGA configuration on an embedded platform...
- Do you use EPCS devices at all?
- Only configure FPGA through CPU and software?
- Replace EPCS1 with software or do you program via JTAG?
From the altera app note the embedded programming for an EPCS1 takes around 15 seconds with Coldfire processor...
Have to decide now on my final design and don´t want to have any surprises in the future (o;
- Do you use EPCS devices at all?
- Only configure FPGA through CPU and software?
- Replace EPCS1 with software or do you program via JTAG?
From the altera app note the embedded programming for an EPCS1 takes around 15 seconds with Coldfire processor...
Have to decide now on my final design and don´t want to have any surprises in the future (o;