Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

P89LPC915 NXP by Philips

Status
Not open for further replies.
Y

yusef

Newbie level 5
Joined
Sep 24, 2005
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,343
Hi...
Someone know about a practical and simple inteface schematic for reading and programing in circuit the 98LPC915 NXP microcontrollers procesor using the FlashMagic software..?
Any information about circuits for reading this microcontroller in circuit or another software for that purpose is very apreciated.
Flash Magic is the standard tool for programming NXP microcontrollers
Thanks in advanced
[/i]
 

Hi, ctownsend, thanks for you reply.
I have the flash magic software, the problem is buliding a cheaper interface to read and program this microcontroller P89LPC915 in specific from de db9 (RS232) port , may be a collection of serial interfaces using MAX232 or MAX3232 for that purpose
I found some schematic in the Philips NXP page, but is maybe a little complex for that because is for various models , the idea is read this micro in circuit ( boot and hex ) to backup the firmware inside and reprogram other corrupted firmwares
Thanks in advanced
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top