iogear
Newbie level 3
Calibre LVS error: no matching ".SUBCKT" statement for "RPODWO_M"
Hello all,
I have some problems. After I finished the layout, I try to run the LVS. I cannot get rid of these errors.
Error: No matching ".SUBCKT" statement for "RPODWO_M" at line 25 in file "/home/cltai/project90/Buf_lvt_1x.src.net"
ERROR: Source could not be read.
RPODWO_M is a P+ diffusion resistor with 3 terminals. I tied the third terminal and positive terminal to the VDD. The transistor level simulation is working and the result is expected. However, it looks like the resistor of my layout never matching the schematic. I have no clue what are they different.
Hello all,
I have some problems. After I finished the layout, I try to run the LVS. I cannot get rid of these errors.
Error: No matching ".SUBCKT" statement for "RPODWO_M" at line 25 in file "/home/cltai/project90/Buf_lvt_1x.src.net"
ERROR: Source could not be read.
RPODWO_M is a P+ diffusion resistor with 3 terminals. I tied the third terminal and positive terminal to the VDD. The transistor level simulation is working and the result is expected. However, it looks like the resistor of my layout never matching the schematic. I have no clue what are they different.