Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Referring to this diagram, how to test this SCR Module which have two SCRs connected

Status
Not open for further replies.
D

danishdeshmuk

Advanced Member level 1
Joined
Aug 17, 2011
Messages
426
Helped
35
Reputation
70
Reaction score
35
Trophy points
1,308
Activity points
4,001
Referring to this diagram, how to test this SCR Module which have two SCRs connected in series ?

IMAG0002 | Flickr - Photo Sharing!

What testing circuit would be useful and/or how to test this with a DMM ?

thanks in advance
 

You have all terminals of both of these SCR available independently, so it really does not matter if they are connected in series.
To test an SCR using DMM try following:
1. Test the diode action between Gate and cathode
2. Now test for SCR turn on: Short gate & anode of SCR with +Ve of DMM & -Ve to cathode. It should show turnon state or low resistance.
3. Now test for SCR off state: Between Anode and cathode it should show. open circuit or high resistance (Note here we have not used Gate terminal)

Hope this helps.
 
Do this...........

Take wires out of component

First: Preliminary test as atripathi wrote.............
with ohm meter
https://www.ab.com/support/abdrives/documentation/fb/1012.pdf

Second: Test with lamp

SCR_tests.png IXYS_MCC95_MCD95.png
 
Last edited:
kak111 said:
Do this...........

Take wires out of component

First: Preliminary test as atripathi wrote.............
with ohm meter
https://www.ab.com/support/abdrives/documentation/fb/1012.pdf

Second: Test with lamp

View attachment 60976 View attachment 60978
Click to expand...


How to test MCD version of this Scr module which have free wheeling diode in series with SCR ??

Test Scr as individual element as you described & test diode alone as a single element ??? Is this the right approach to test this module out ???
 
How to test MCD version of this Scr module which have free wheeling diode in series with SCR ??
Click to expand...

Look this......................

SCR&Dio_Modules_pic.jpg
 
Here are simple instructions, how to select load resistance and gate resistor for testing thyristor.

Thyristor_test_compVal_01.jpg

Look for example
**broken link removed**

You find values for
Ihold = 200mA
Ilatch = 300mA
Igt = 150mA ( +25Celsius)
 
kak111 said:
Here are simple instructions, how to select load resistance and gate resistor for testing thyristor.

View attachment 62668

Look for example
**broken link removed**

You find values for
Ihold = 200mA
Ilatch = 300mA
Igt = 150mA ( +25Celsius)
Click to expand...

How to select values for Rg & RL for this particular example that you've taken above ?

would you show me how to do that , please ?

thanks a lot
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top