urian
Full Member level 3
Hi,there
I'm using IC5141 and want to build a bias module for my comp.The schematic is as below. The input i50u is connect to external 50uA ideal current source and comp_bias is output pin which connects a bias voltage for tail current source.
When I clicking save,the CIW shows a wrong message like this:
ERROR:Illegal bus reference - Can't tap "<comp_bias>" from net "i50u".
It seems that the pins comp_bias and i50u can not connect together.But I really want to export the comp_bias like this.How to achieve it without error mentioned by ic5141?
Thx in advance.
I'm using IC5141 and want to build a bias module for my comp.The schematic is as below. The input i50u is connect to external 50uA ideal current source and comp_bias is output pin which connects a bias voltage for tail current source.
When I clicking save,the CIW shows a wrong message like this:
ERROR:Illegal bus reference - Can't tap "<comp_bias>" from net "i50u".
It seems that the pins comp_bias and i50u can not connect together.But I really want to export the comp_bias like this.How to achieve it without error mentioned by ic5141?
Thx in advance.