Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What's the file extension after doing floor planning

Status
Not open for further replies.
S

santuvlsi

Member level 4
Joined
Aug 19, 2007
Messages
70
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,288
Activity points
1,800
Hai to All,

What will be the output after doing the floorplan, means do it will be netlist?

what is the extension of floorpaln( i mean for hdl we write as. vhd,.v,) like that.
 

Re: About Floor Planning

hi santuvlsi,

After floorplan you can save the entire design in .def form or you can export only the floorplan details in .fp form.

Prithivi.

Added after 59 seconds:

hi santuvlsi,

After floorplan you can save the entire design in .def form or you can export only the floorplan details in .fp form.

Prithivi.

Added after 52 seconds:

hi santuvlsi,

After floorplan you can save the entire design in .def form or you can export only the floorplan details in .fp form.

Prithivi.
 

About Floor Planning

the output format of the floorplan depends on the tool used to do the floorplan , but .def is the design exchange format accepted by all the tools, and using all the tools we can dump out the .def file,
it contations the physical location of the pins, macros which are used in the design
 

Re: About Floor Planning

Dear Friend,

Similarly what are the extension file of

Synthesis
STA.
DFT,
PNR
DRC and LVS

its nothing by step step process

for this under what extension r these files stored.
 

    S

    santuvlsi

    Points: 2
    Helpful Answer Positive Rating
Re: About Floor Planning

phutanesv said:
Dear Friend,

Similarly what are the extension file of

Synthesis
STA.
DFT,
PNR
DRC and LVS

its nothing by step step process

for this under what extension r these files stored.
Click to expand...

After
STA : you'll generate sdf file
DFT : Netlist and PDEF
PNR : GDSII
DRC : run on gds and creates summary file (DRC.sum)
and LVS : generates report file (lvs.rep)

File extension depends on tools used........
 

    S

    santuvlsi

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top