Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

looking for projects in analog domain

Status
Not open for further replies.
A

alpeshchokshi

Full Member level 2
Joined
Mar 5, 2006
Messages
127
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,296
Location
San Jose, CA
Activity points
2,064
hello friends can you suggest me in which different area of analog design
for projects i can do???
please let me know
thanks
 

Hi,
If you are want to work on some exciting topic what I can suggest is
Ultra High speed logic Design Using CML logic.

Else you can also try in ultra high speed data convertors.

If you want to begin on a lower note then try Op Amp blocks or PLL design.

Depending on your interest you can design Ultra High Speed or Ultra Low power designs.

Thanks
Shaikh Sarfraz
 
hi alpeshchokshi,

i would suggest you to design a Phase Locked Loop for bluetooth applications.

regards,
vijay
 

We have a voltage regulator with no ripples,can u analyse it? it VCC between 45...48 and output is 25 fixed,and ripples 55 db below the out put.we have'nt data sheet of transistors.
 

I would suggest you to design a high speed ADC for IF-sampling.
 

thanks for your response
i would like to interpolate more on ADC/DAC or PLL domain
so please send me some informative reference through which i can get start.
 

I will suggest you to start with ADC design. That gives good exposure if you are a beginner.

If you want more specifically, fora short term project, you can start from Pipeline ADC architectures. The reference paper I suggest is

A 1.5 V, 10-bit,14.3-Ms/s CMOS Popeline Analog-to-Digital-Converter

The paper is from IEEE Jouranl of Solid State Circuits, May 1999.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top