Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question : How to design a cell balancing circuit using Bi-Directional converters.

C

Chiranka K

Newbie
Joined
Mar 19, 2024
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
28
Hello guys,
Im trying to design a cell balacing circuit using bi-directional converters, this should make the SOC's of my cells same, incase there is an imbalance.
 
Sort by date Sort by votes
This would be an "active" battery balancer rather than the usual passive balancer.

Have you tried Googling for this ?

What you can look into might be a synchronous buck converter running at 50% duty cycle. A cell on one port and another on the other port.
Then leap-frog more of these for more cells.

boB
 
Upvote 0 Downvote
The above post brings to mind a topology I simulated:
One inductor serving a double duty buck converter role. I've depicted clock pulses as a simplification though they can come through a half-bridge (or a 555 IC if current demand is low). Volt level must be adjusted low enough so that no battery can overcharge.

Low battery asks for current. Full battery requests no current. The scope trace depicts batteries in different states of charge. For example battery voltage might range between 3.7 and 4.2 V.

One inductor double duty buck conv different times charge 2 bat's.png
 
Upvote 0 Downvote

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top