Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How can I switch the PBA mode and GBA mode in the encounter EDI?

Status
Not open for further replies.
G

guilinzhen

Newbie level 3
Joined
Apr 10, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
20
how can i switch the pba mode and gba mode in the encounter edi?

how can I switch the between PBA mode and GBA mode in the cadence encounter edi ?and what is the default setting in the EDI?thank you !
 

Re: how can i switch the pba mode and gba mode in the encounter edi?

Not sure about PBA in EDI.

As far my knowledge, we don't enable PBA mode in PD tools, usually will be enabled in the STA sign-off tool, that too when you've few 100 violations.

In PT, you will use "report_timing -pba_mode exhaustive" to enable the PBA mode.
 
Re: how can i switch the pba mode and gba mode in the encounter edi?

Hi Kumar

If possible can u help me few commands in encounter to do

1 sanity checks

2 utilization
congestion cell and pin density

clock tree report

power reports of clock and chip ??
 

Re: how can i switch the pba mode and gba mode in the encounter edi?

Sorry, I don't have any documents to refer.

Please check the User Manual & Command manual for the commands.
 

Re: how can i switch the pba mode and gba mode in the encounter edi?

encounter is GBA based ...while Tempus is based on GBA initially + PBA through retiming. ..... The new upgrade of EDI called Innovus is able to able to access some of the features of PBA in the EDI amongst other things.....
You should contact your cad to utilize the features of the newer tool version
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top