Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is the application of RSSI ?

Status
Not open for further replies.
M

Mac7978

Member level 2
Joined
Oct 17, 2003
Messages
45
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
377
Somethings about RSSI

Hi all,

RSSI - received signal strength indicator. Besides the function of strength indication, does it has other special applications?

Best regards

Mac
 

Re: Somethings about RSSI

You can use RSSI to calculate other parameters.

A.T.B
 
Re: Somethings about RSSI

Donj, Thx for your reply.

But what is the other paramemters ? Could you explain more detials.

As i m designing a receiver using Melexis Th71112, but i dunno the function of RSSI signal...

Best rgd

Mac
 

Re: Somethings about RSSI

RSSI can be used as a tool to give an indication of link quality, but not always give good results. The received signal level can also be affected by in-band interference sources. So, a strong signal level can be reported, but data can be corrupted. To compensate for this some systems use loopback data transfer in parallel with RSSI reading.
RSSI circuit can be used also as a log detector. For some circuits this log detector is very accurate, and the dynamic range can be up to 100dB.
 
Re: Somethings about RSSI

Mac7978 said:
Donj, Thx for your reply.

But what is the other paramemters ? Could you explain more detials.

As i m designing a receiver using Melexis Th71112, but i dunno the function of RSSI signal...

Best rgd

Mac
Click to expand...

RSSI says something about the received signal strength and can be used to control power level of the transmission (like "You can reduce your output power because I am close") and more recently some use RSSI as an indicator for position.
As vfone mentioned, RSSI is not completely reliable because it can be affected by obstructions, multipath and interferers.

Don :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top