Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

5V Step-Up Voltage Regulator

Status
Not open for further replies.
I think that Pins #1,3-left unconnected and #2-Positive Terminal of the LiPoly battery and #4-Negative Terminal of the battery.#5-The voltage output that is stepped up.
 

pblanos said:
how do I connect this 5V Step-Up Voltage Regulator with a LiPoly Battery of 3.7V on a breadboard?
Click to expand...
That's explained in the link you gave. There's even pictures.

adi0803199 said:
I think that Pins #1,3-left unconnected and #2-Positive Terminal of the LiPoly battery and #4-Negative Terminal of the battery.#5-The voltage output that is stepped up.
Click to expand...
What on earth are you talking about? The module only has 3 pins.
 
Sorry for the wrong suggestion.My mistake.
 

thanks for the quick reply, just realized how simple my question was!
 

The header pins that are recommended look to be too big. They will probably damage the contacts on a breadboard. Use 20 or 22 guage solid tinned copper wire instead.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top