sns22
Member level 2
Hi all,
I going to use a SOCKET, SMA, RIGHT ANGLE, 50OHM in my PCB link here https://uk.farnell.com/te-connectivity-amp/5-1814400-1/socket-sma-right-angle-50ohm/dp/1248989
I was able to find the smb_90.dra and smb_90.psm files in the Allegro Starter / Evaluation Library Cadence_Starter_Library Downloaded from the Cadence web page https://www.cadence.com/products/pc...2.aspx?regid=da188902c34d49be8fb3ffd88351b2d4
However there is no padstack available for same.
Can anyone tell where to get the footprint for the connector?I put these files in the C:\Cadence\SPB_16.5\share\pcb\pcb_lib\symbols. When I add the pcb footprint in my design The design check rules works good. But when I try to create a netlist in the design I get a
WARNING
ORNET 1119)NO spice template ignoring. And it ignores the connectors in Orcad Capture.
Can someone help me with the footprint for the same.
:-?
Sneha
I going to use a SOCKET, SMA, RIGHT ANGLE, 50OHM in my PCB link here https://uk.farnell.com/te-connectivity-amp/5-1814400-1/socket-sma-right-angle-50ohm/dp/1248989
I was able to find the smb_90.dra and smb_90.psm files in the Allegro Starter / Evaluation Library Cadence_Starter_Library Downloaded from the Cadence web page https://www.cadence.com/products/pc...2.aspx?regid=da188902c34d49be8fb3ffd88351b2d4
However there is no padstack available for same.
Can anyone tell where to get the footprint for the connector?I put these files in the C:\Cadence\SPB_16.5\share\pcb\pcb_lib\symbols. When I add the pcb footprint in my design The design check rules works good. But when I try to create a netlist in the design I get a
WARNING
ORNET 1119)NO spice template ignoring. And it ignores the connectors in Orcad Capture.Can someone help me with the footprint for the same.
:-?
Sneha
