Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Circuit required to generate 3 phase 35kHz, 120 degrees apart, 50% duty cycle:

Status
Not open for further replies.
A

Anna Conda

Banned
Joined
Oct 13, 2011
Messages
159
Helped
48
Reputation
292
Reaction score
140
Trophy points
1,323
Location
Melbourne
Activity points
0
Hello All, I am seeking a simple CMOS series 4000 circuit design that will take in a clock, 105kHz, and produce 3 outputs 120o apart, 35kHz each, 50% square wave, (or a 200nS pulse every edge of the 35kHz out, i.e. 70kHz pulse train).

The CD4018 can provide a divide by 3 that will give the 35kHz (50%), is there a way of using the other output pins to get the other two signals 120o apart of the main output.

I am happy to provide remuneration via paypal for an elegant circuit solution, with proof of operation.

Regards, Anna.
 

The 3-phase, 50% d.c. signal can be straightforwardly generated from a 210 kHz (x6) input clock. 105 kHz involves a weird mixed synchonous/asynchronous design.

CD4018 outputs are switching on one clock edge, I don't see how it would provide /3 with 50% d.c.
 

Hello there, although the 4018 does provide a /3, it is not clear whether you would get the other two o/p's out of it with 120 degree separation.

Possibly 210kHz and /6 would give you the 3 o/p's you require with less bits in the circuit.
 
Hi All, now have a circuit based on a 4018 that gives me the 3 o/p's 120 degrees apart, 35kHz each. I am using the edges to give 3 x 70kHz pulse streams, each 120 degrees apart, each pulse 200nS, to provide the basic timing for a 3 phase (35kHz) power circuit, for a 6kW/12kW rectifier, running off rectified 415Vac (3 phase).
Thank you so much for the timely replies :eek:)
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top