Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Phase Response of Scattering Parameter Not Matching

Status
Not open for further replies.
A

abhisheksarkhel

Junior Member level 3
Joined
Dec 11, 2007
Messages
31
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Activity points
1,495
I am trying to design the split ring resonator proposed in Electromagnetic parameter retrieval from inhomogeneous metamaterials i.e FIG-2 of the paper in HFSS-11.After simulation though magnitude response of S11 and S21 parameter is getting a exact match but phase response of S11 and S21 is not matching.Can any body suggest me where i am going wrong?I had attached both hfss file and the paper which i am following.

Thanks
 

Attachments

  • Smith.rar
    9.1 KB · Views: 116
  • Electromagnetic parameter retrieval from inhomogeneous metamaterials.pdf
    871.5 KB · Views: 104

I am not getting any response............I could not able to understand the cause of this difference.Any suggestion will be of great help.
Thanks.
 

De-embed your top and bottom Floquet ports to the top and bottom of the unit cell respectively. You want the phase of r and t at these interfaces as they are the reference planes for the equations used.

Have Fun
 

Thanks for your response.I solved my problem.Actually phase response which i got during simulation is not different w.r.t the result in the paper .In the paper the given phase response is unwrapped version and simulated result is wrapped version.I unwrap the phase response obtained through simulation in matlab and then plot it.I got exact match with the paper.
 
can you explain in detail.....i haven't understand
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top