Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by zhanhualiu

  1. Z

    Compatibility of on-time RTOS

    On-Time rtos The RTOS versions for different CPUs are different.You have to chose the suitable one for your CPU.Usually you can run the application on the RTOS simulative environment in your PC.
  2. Z

    Is Nucleus RTOS a bootable OS?

    Nucleus RTOS I think the application should be statically link to Nucleus core,like we do for uCOS-II.
  3. Z

    temperature control using 89c51

    temperature indicator controller using ic 89c51 ATMEL 8051 Flash Based-Microcontroller Programmer DIY look this: **broken link removed**
  4. Z

    Can I set input and output separably for my PIC16F877A according to IC input/output?

    Input and output Add a flash memory in the system to store the test vectors of ics that you want to test.
  5. Z

    use 8952 to control ac loads

    Carefully check the VCC and GND for MCU,they should be seperately connected to power supply with VCC&GND of relay driver(uln2003),and the GND for oscillation crystal should be seperately connected too.
  6. Z

    How good is Altium Designer?

    differential pair autorouter dsn The House_cat's point is very good. I am working for a PCIExpress project with Altium 6 right now. The PCB is 14-layers board. I think Altium is a good tools for Schematic and PCB. As House_Cat mentioned,The software doesn't design a board, the operator does.
  7. Z

    8051 embedded code 4 serial comm

    Look at this file.
  8. Z

    C Langauge support for 8051 microcontroller

    K*eil C is the best choice for C8051.It's easy to use. take a look here: For Chinese version: ftp://laogu.com:laogu.com@ftp.laogu.com/upload/k*eil中文版本（绝对好用，无限制免安装版）.rar other choice: ftp://ic21:21ic@file.21ic.com.cn/阿台珍藏_K*eil8.02a/K*eil_c51_v802a.rar
  9. Z

    Whats the max. accuracy for ADC 0809 when Vref is lowered?

    ADC 0809 Accuracy The accuracy and reference voltage are different issures for A/D converter. The accuracy of ADC0809 is 1.5 LSB.
  10. Z

    Interfacing keyboard to microcontroller

    keyboard interfacing with 8051 microcontroller Maybe this application note is useful for you.
  11. Z

    Which language is better for uC, Assembler or C?

    assembler or C??? if possible,you should use c to write the code.
  12. Z

    Is it possible to clone of the XDS510PP (TI DSP emulator) ?

    xds510pp plus schematic check here: **broken link removed**
  13. Z

    Looking for MCS51 with 2 ADC and 2 DAC

    Check here.: **broken link removed**
  14. Z

    which is best controller to start

    C51 seriers + keil C is a very goog start kit.
  15. Z

    Recommend a 16-bit CPU architecture

    H8s seriers
See more

Part and Inventory Search

Back
Top